Features:
• Boost your Computer’s Sound: Equipped with an XMOS USB receiver chip, the K3 is capable of decoding up to 384kHz/32 bit PCM and native DSD256- the same as many DACs costing much more. The K3’s dual crystal oscillators ensure that any digital audio signal being fed into the DAC are exactly correct for further enhanced sound quality. Just connect the K3 to your computer via USB to instantly upgrade to high-fidelity sound, and enjoy your music the way it was meant to be heard.
• Highly Optimized Architecture: The K3’s well-thought-out internal design consists of two main layers, working together perfectly in harmony. Digital processing carried out by the high-performance AKM AK4452 with 32-bit VELVET SOUND technology and the fully differential outputs for true balance output, while the analog signals are handled and amplified by a design consisting of LPF/voltage amplification and a current drive circuit.
• Wash Away the Noise: The combination of the proven OPA926 with its low-distortion, low-noise, nd high output swing along as the low-pass filter (LPF) ensures the K3 effortlessly provides highly resolving sound, pumping out 320mW at 16 ohms from the balanced output.
• Simply Reliable USB Power: The K3 adopts the modern USB Type-C input interface for a more reliable and stable connection, including that of power. However, care to ensure an uncompromised power supply doesn’t stop there – the K3 implements over voltage protection (OVP) and a double-filter circuit to ensure power supply stability, while the digital and analog audio circuits each get their own power supply to greatly reduce crosstalk.
• No more Channel Imbalances: The secret to effectively eliminating channel volume imbalances is to use an ADC volume control, which is implemented in the K3. Plus, an added side benefit is that by reconstruction the ADC curve, the user is able to smoothly adjust volume to a more accurate and finer degree, allowing the K3 to be used with headphones of all kinds of sensitivity for a variety of listening needs.
• Gain and Bass Switches: The switch for high and low gain ensures that you can use the K3 with a variety of headphones, and that your listening volume needs are covered. The hardware ass boost switch enhances the dynamic range of the lower frequencies and gives them some extra punch to really make you sings, games, and movies come to life.
• Tiny Round Goodness in the Palm of your Hand: The all-aluminum black body has been painstakingly CNC-machined, anodized, and sandblasted to ensure that the K3 feels robust yet perfectly textured for a great feel in your hands. Combined with its small size, you can easily take the K3 wherever you need to.
• Two Modes for Many Situations: Sometimes, you may not have access to a device that can connect to the K3 via USB Audio Class 2. In these situations, you can go to USB Audio Class 1 mode with just the flick of a switch.
• A Distinctly Cohesive Tactile Audiovisual Experience: The volume knob, with 45 degree notches etched onto its surface and perfectly sized to allow easy one-finger operation, is designed to perfectly blend in with the curves of the K3’s body for a distinctive touch. Next to the volume knob is an RGB light that indicates what kind of digital audio is being input to the K3, visually confirming what you are hearing in your music.
• Dual Headphone Jacks: Being optimized for indoor desktop use, the K3 is equipped with both 3,5mm single-ended and 2.5mm balanced headphone jacks. Both outputs have audio jack detection, which means that when headphones are inserted into the balanced out, balanced boost automatically kicks in resulting in about a 50% output power increase compared to the single-ended out.
• Line Out Connector: The 3.5mm line out is driven directly by the OPA1612 op-amp, to ensure as little sound quality reduction as possible. The line out output is also adjustable with maximum power output up to 2Vrms, to ensure compatibility with a wide variety of active speakers and external amplifiers.
• Coaxial and Optical Digital Outs: The XMOS USB receiver chip in the K3 directly converts any USB audio input to digital signal output via the coaxial and optical connectors, allowing you to connect to speaker systems, amplifiers, or other external decoders.
Specifications:
• DAC: 384kHz/ 32bit
• DSD: DSD256
• Frequency Response: 20Hz-80kHz
• SNR: 113Db
• THD+N: 0.004%
• USB Chip: XMOS XUF208
• USB Driver: ASIO/KS/DS/WASAPI/DSD DOP (Native)
• Audio DAC: AKM AK4452
• LPF OP AMP: TI OPA1612
• Drive OP AMP: OPA926 x2
• USB Type-C
• USB Audio Class: UAC 1.0 + UAC2.0
• Volume Knob: ADC
• Gain: L/H
• Bass Boost: 0/+6dB
• Line Out: 3.5mm
• Headphone Out 1: 3.5mm Single-Ended Output
• Headphone Out 2: 2.5mm TRRS Balanced Output
• Coaxial Out: RCA for 192kHz, Supports DSD64 DOP
• Optical Out: Up to 96kHz
• Output Power 1: 220mW(16 ohms) / 120mW (32 ohms) for 3.5mm Headphone Output
• Output Power 2: 320mW(16 ohms) / 200mW(32 ohms) for 2.5 TRRS Balanced Headphone Output
• Line Level: 1.9Vrms
• RGB Indicator: 48kHz (Blue) / 48kHz (Yellow) / DSD Format (Green)
• Dimensions (W x H x D): 7.0 x 5.8 x 2.2cm
• Weight: 82g
• Warranty: 1 Year