Kicker 12CX600.5 CX Series 5-channel Car Amplifier with Bonus Foam Cleaner

Model Number: Kicker 12CX6005
Web Code: 12908150

Overview

The CX 600.5 Amplifier is built to be the complete package in a single amplifier. Class D technology to powers four mid/high range channels and one big bass channel. An enormous 12dB of variable bass boost with KickEQ™ lets you get that extra bump with the optional volume knob. A powerful crossover and 24dB subsonic filter is also included, letting you quickly customize your sound to perfection.
SAVE $270$329.99
SALE ends:
Available online only
Most Marketplace items ship from sellers within 2 business days. Delivery times vary by location.

• Power Output: The CX600.5 is a 5-channel amplifier designed to power two pairs of full-range speakers and one or two subwoofers.

• Input Gain Control: Independent rotary input Gain controls are provided for the front (Amp 1), rear (Amp 2), and Sub channels. The controls let you match the output of the source unit to the amplifier. When setting the Gain, you should turn the source unit up to about 3/4 of the maximum volume, adjust the gain until audible distortion can be heard, then back the gain down slightly.

• Crossovers: The amp has separate crossovers for the front, rear, and sub channels. The front and rear channel crossovers can be high-pass or full-range (off). The rotary controls range from Off and 50Hz to 200Hz. The sub crossover is low pass with a frequency range of 50Hz to 200Hz. The rotary controls can be adjusted with a small slotted screwdriver (not included).

• Input Level: The RCA inputs on the amplifier will accept a high-level or low-level input. Using the Input Level switch, you can select high level (button in) or low level (button out) input.

• Sub Input: The sub channel signal can come from a dedicated subwoofer output from your source unit (plugged into the sub RCAs), or from the input signal to Amp Channel 2. A 2-way switch lets you select the input source for the sub channel: Sub RCAs (button in) or Amp 2 (button out).

• Fader: The Fader switch turns on or off fader capability for the amplifier. If you are driving the amp with separate front and rear inputs, you should turn the fader on (button in). If you only have one pair of stereo inputs, you can drive all five amplifier channels with that input by turning off the Fader button (button out).

• KickEQ Bass Boost: The sub channel bass level can be increased between 0dB and +12dB via the rotary KickEQ Bass Boost control. The bass boost circuit is centered at 40Hz.

• Subsonic Filter: The amplifier's sub channel features a non-defeatable 25Hz Subsonic Filter with a 24dB per octave slope. The Subsonic Filter rolls off extremely low frequencies that can't be cleanly reproduced by the amplifier and subwoofers. This reduces distortion and helps the amp run more efficiently.

• Optional Remote Bass Level: The CX600.5 features a 3.5mm port for connecting the optional CXARC Remote Bass Level Control. The CXARC has a rotary control for raising or lowering the output level of the amplifier's sub channel from the front of the vehicle. The Remote Bass Level Control can be installed under the dash or on the center console of your vehicle, and comes with a 19.75' cable.

• Auto Turn-on: The amplifier has two Auto Turn-on modes: +12V and DC Offset. The preferred auto turn-on method is to run an 18-gauge wire from the remote turn-on lead of the source unit to the Remote (REM) terminal on the amp. When a +12V signal is detected on the wire, the amplifier will turn on. If your source unit lacks a remote turn-on lead (a factory head unit, for example), you can choose to turn on the amplifier via the DC Offset method. When a 6V DC offset is detected on the source unit's speaker outputs, the amplifier automatically turns on.

• Input Signal: The CX600.5 is capable of receiving either high- or low-level input signals, and you can select the input type on the end of the amp. Three pairs of female RCA jacks are provided on the end of the amp. If you are using a speaker-level source, you can use the optional Kicker KiSL speaker level to RCA adapter. The Input Sensitivity is 250mV-10.0V (High Level), while the Low Level Input Sensitivity is 125mV-5.0V.

• Certified Power: Each amplifier is tested when it comes off of the assembly line. Tests are run for Total Harmonic Distortion, Signal-to-Noise Ratio, Protection Circuit, and Total Power Output. A Certified Power certificate with model and serial number is included with each amp with the measured power output figure, and a pass/fail grade for the other tests.

• Bonus Foam Cleaner: Use the included cleaner to keep your car stereo and interior trim spotless and free of dust.

• Specifications:

• RMS Power Output (Watts x Channels): 40 x 4, 300 x 1

• Power at 2 Ohms (Watts x Channels): 75 x 4

• Bridged Power (Watts x Channels): 150 x 2

• Minimum Impedance Bridged: 4

• Minimum Impedance Unbridged: 2

• Best Frequency Response: 10-20k Hz

• THD at Rated RMS Power: 1%

• Signal to Noise Ratio: 95 dB

• Input Voltage: 14.4v

• Amplifier Class: AB/D

• Low-Pass Crossover Frequency: 50-200 Hz

• Low-Pass Slope (dB/octave): 12 dB/octave

• High-Pass Crossover Frequency: 50-200 Hz

• High-Pass Slope (dB/octave): 12 dB/octave

• Bass Boost: 0-12 dB

• Bass Boost Frequency: 40 Hz

• Fan Cooled: No

• Fuse Rating: 80

• Speaker Level Inputs: RCA

• Preamp Outputs: No

• Dimensions (W x H x D): 14” x 2-3/8” x 6-11/16”

• Warranty: 2 Years

  • Kicker 12CX600.5 CX Series 5-channel Car Amplifier
  • Hardware
  • Owner's Manual
  • Bonus Foam Cleaner

    See helpful questions and answers from shoppers like you.

    Shipping Cost

    Seller offers free standard shipping on all orders.

    Please allow 2 business days from the date of order for your product to ship.

    **In the event that product is unavailable, you will be refunded within 48 business hours.

    Other important information

    Remote regions of Canada, additional shipping fee may apply

    Returns can be made within 30 days of receiving your order.

    AVGearShop Restocking Fees / Return Eligibility
    Category Return Period Un-opened Opened/Unused Opened/Used
    Headphones 30 Days 0% Not Returnable Not Returnable
    All other products 30 Days 0% 0% 10%
    All returned products must include original packaging.

    Return shipping costs will be paid by the seller for all cases where the product is defective, damaged or incorrect. For other cases (e.g. you changed your mind), you will be responsible for this cost.

    To request a return

    Please contact the seller directly from your Order details page, and provide the following information:

    • Web ID (8-digit number) & product description
    • Number of items to be returned
    • Date you recieved your product
    • Condition of product
    • Condition of packaging
    • Reason for return

    All refunds will be processed within 4 days