Boîtier d’appareil photo numérique Wi-Fi 4K X-T2 de Fujifilm, carte 64 Go, étui, flash, batteries, chargeur, trépied + trousse - version américaine avec garantie du vendeur

Modèle n° : 16519247-94790-Kit
Code Web : 14672550

Boîtier d’appareil photo numérique Wi-Fi 4K X-T2 de Fujifilm, carte 64 Go, étui, flash, batteries, chargeur, trépied + trousse - version américaine a

Survol

Capteur APS-C X-Trans CMOS III X-Processor Pro Engine0,77x 2,36 m-Dot DELO Viewfinder3.0 1,04 m-Dot écran ACL inclinable 3 voiesUHD 4K interne vidéo et amplificateur; connectivité Wi-Fi F-Log Gamma intégréesystème de mise au point automatique hybride intelligent 325 pointsjusqu’à 8 images/s et ISO 51200étanche; Boîtier étancheDeuxmodes de simulation de film SD UHS-II et d’effet de grain

Signaler une erreur de traduction

Survol

Capteur APS-C X-Trans CMOS III X-Processor Pro Engine0,77x 2,36 m-Dot DELO Viewfinder3.0 1,04 m-Dot écran ACL inclinable 3 voiesUHD 4K interne vidéo et amplificateur; connectivité Wi-Fi F-Log Gamma intégréesystème de mise au point automatique hybride intelligent 325 pointsjusqu’à 8 images/s et ISO 51200étanche; Boîtier étancheDeuxmodes de simulation de film SD UHS-II et d’effet de grain

Signaler une erreur de traduction

Offering a more conventional form factor and packing in UHD 4K video recording, Fujifilms X-T2 Mirrorless Digital Camera certainly aims to fill the needs of many working professionals. Equipped with a 24.3MP APS-C X-Trans CMOS III image sensor and the X-Processor Pro Engine, users will be able to capture finely detailed imagery quickly and with low noise at sensitivities up to ISO 51200. The powerful combination permits rapid image capture at up to 8 fps with full AF tracking or at up to 14 fps using the silent electronic shutter. In terms of AF, the X-T2 uses an Intelligent Hybrid system with 325 points that ensure accurate, fast tracking of subjects in all modes.For video, the X-T2 offers internal UHD 4K video as well as an 8-bit 4:2:2 HDMI output. The internal recording offers 100 Mbps bitrate for capturing fine details with ease. Along with this an F-Log Gamma setting will be available for capturing a flat picture best used in serious grading applications. Fujis array of Film Simulations and Grain Effects can also be used here, for both photo and video shoots.Improved handling is a key upgrade in the X-T2, incorporating a larger grip, locking dials, raised buttons, and more to make operation smoother. The weather-sealed body also sports a 0.5 0.77x 2.36m-dot OLED EVF with a larger eyecup for comfortable composition and a base refresh rate of 60 fps, which can be boosted to 100 fps. There is also a 3.0 1.04m-dot three-way tilting LCD screen for alternative viewing options. This screen has a unique tilt that permits shooting at odd angles, including in the portrait orientation. Additionally, it has a focus lever joystick that allows for rapidly adjusting and changing the selected AF point or area.24.3MP APS-C X-Trans CMOS III Sensor

Utilizing Fujifilms unique, randomized pixel array, the 24.3MP APS-C X-Trans CMOS III sensor affords a high degree of image quality and sharpness due to the omission of an optical low-pass filter. Versus conventional pixel patterns, the X-Trans design more closely mimics the organic nature of film in order to produce nuanced colors and smooth tonal transitions, while also reducing moiré and aliasing. 

When paired with the X-Processor Pro, the sensor is also capable of producing clean image quality with reduced noise values, along with a native sensitivity range up to ISO 12800 that can be expanded to ISO 51200.

X-Processor Pro

Aside from benefitting the low-light performance, the X-Processor Pro also contributes to fast performance throughout the camera system, including a start-up time of 0.3 seconds, shutter lag time of 0.05 seconds, shooting interval time of 0.19 seconds, and AF speeds of up to 0.08 seconds. Coupled with the on-sensor phase-detection AF, up to 8 fps continuous shooting is also possible with full-time motion predictive AF for tracking fast-moving subjects while shooting. The ability to record compressed raw files also helps to expedite file transferring for longer continuous burst shooting, and both a fast top focal plane shutter speed of 1/8000 sec and a flash sync speed of 1/250 sec further contribute to shooting versatility.

UHD 4K Video Recording and F-Log Gamma

Beyond stills shooting, the X-T2 is the first Fujifilm mirrorless camera to offer UHD 4K video recording options. It records this ultra high resolution 3840 x 2160 footage at an excellent 100 Mbps bitrate and with a minor 1.17x crop of the sensor. It also uses a 5120 x 2880 sample of the sensor that is 1.8x more resolution than the UHD 4K frame that is created, ensuring maximum resolution and detail is provided. Footage can be recorded internally for up to about 10 minutes, though with the addition of the optional Vertical Power Booster Grip users will be able to record for up to 30 minutes with ease. Also, the camera features a 3.5mm microphone jack for more advanced audio solutions. Users looking for a headphone jack will find one on the optional Vertical Power Booster Grip. 

Full HD recording also benefits from the X-T2s video prowess, taking a 3000 x 1687 input to create finely detailed 1920 x 1080 footage at 100 Mbps. A variety of frame rates are available, including 60p, 50p, 30p, 25p, 24p, and True 24.00 for Full HD recording and 30p, 25p, 24p, and True 24.00 for UHD 4K. 

Along with the vastly enhanced recording capabilities, the X-T2 offers an F-Log Gamma setting that provides a flat picture for use in advanced color grading software during editing. This should maximize the potential dynamic range in difficult scenes. Image adjustments can be made as well to highlight tone, shadow tone, color, and sharpness. Additionally, HDMI output is supported with an 8-bit 4:2:2 signal and users will be able to use Film Simulation effects to capture unique video.

OLED Electronic Viewfinder and 3-Way Tilting LCD Screen

There are two distinct ways to monitor and compose images on the X-T2, an electronic viewfinder and a rear LCD screen, depending on your particular needs. The 0.5 EVF offers a high 0.77x magnification along with a 2.36m-dot resolution that ensures crisp imagery. Along with these features, the EVF uses an OLED display that provides deep blacks and rich, vivid colors. To ensure a clear view, the EVF offers a base refresh rate of 60 fps which can then be boosted to 100 fps for moments of intense action. 

The rear 3.0 LCD screen received its own upgrades, especially with the introduction of a three-way tilt mechanism. This allows photographers and videographers to work in a variety of odd angles, including portrait orientation shooting. The screen features a high 1.04m-dot resolution for crystal clear viewing.

Intelligent Hybrid 325-Point Autofocus System

Blending both phase- and contrast-detection focusing methods, the X-T2 is capable of acquiring focus both quickly and accurately. The entire system is comprised of 325 points, of which there are numerous phase-detection points for faster performance that is beneficial to photographing moving subjects. Approximately 50% of the width and 75% of the height of the imaging area is covered by phase-detection points, too, to offer greater compositional freedom without sacrificing fast autofocus performance. The majority of the frame is then also covered by an apt contrast-detection focusing system that has been quickened by the cameras refined processing power for more versatile control. For refined manual focusing control, Focus Peaking is available to highlight lines of contrast in the scene to more objectively determine sharp focus. 

Continuous AF modes have been seriously upgraded, as the X-T2 now offers customization of a variety of settings in order to dial in the performance for your specific subject matter. This includes changing the sensitivity, speed, and more to ensure that just what you want to capture is in focus.

Body and Interface Design

Supporting its use in harsh climates, the durable weather-resistant body design is constructed from magnesium alloy and sealed to protect against dust, moisture, and cold temperatures down to 14°F.

Dual SD card slots allow for a more flexible and reliable means of storing imagery, and both card slots are compatible with UHS-II standards for fast transfer speeds.

The top plate incorporates a series of locking dials and levers for fast, intuitive adjustment over exposure settings, including a shutter speed dial that offers a mechanical shutter speed range from 1 to 1/8000 sec, as well as bulb and time settings. An ISO dial is also incorporated into the shutter speed dial, for confirming the sensitivity setting without having to turn the camera on. The exposure compensation dial lets you choose +/- 3 EV in 1/3 steps, and a command dial position expands the range to +/- 5 EV for further control.

Front and rear command dials integrate a push function for easier use and settings selection and six different function buttons can be assigned to control a range of settings.

Les infos du fabricant ne sont pas disponibles pour ce produit. Consultez les sections Détails et caractéristiques et Évaluations des clients pour en apprendre davantage.

Consultez les questions et les réponses utiles d’autres clients.

Coûts d'expédition

Le vendeur offre l'expédition gratuite sur toutes les commandes.
**Si le produit n'est pas disponible, vous serez remboursé dans les 48 heures ouvrables.

Vous pouvez retourner le produit dans les 30 jours après avoir reçu votre commande.

BuyDirect & Save-Canada Frais de remise en stock et admissibilité au retour
Catégorie Période de retour Non déballé Ouvert et inutilisé Ouvert et usagé
Tout les produits 30 jours 0% 10% 20%

Les produits ne doivent pas être montés et toujours être dans leur emballage d'origine.

Le coût d'expédition du retour sera payé par le vendeur en cas de produit défectueux, endommagé ou d'envoi de mauvais produit. Dans les autres cas (si vous avez changé d'idée ou autre), vous devez payer l'expédition.

Pour demander un retour

Communiquez directement avec le vendeur, â partir de la page des détails de la commande, et ajoutez les renseignements suivants :

  • No d'identification Web (â 8 chiffres) et la description du produit.
  • Nombre d'articles â retourner.
  • Date de la réception de la commande par le client.
  • État de l'article.
  • État de l'emballage.
  • Raison du retour.

Les retours seront traités dans les 4 jours ouvrables.