• IMPORTANT BEFORE USE (1) Remove the yellow adhesive tape from inside the water tank and the blue tape from the exterior. (2) Take out and discard the protective foam block from the base of the water tank. If you skip this step, the water valve will not function properly, so if you add water directly to the tank, it will leak. (3) Please carefully read the Startup Guide, Instruction Manual, and all warning labels on the machine. (4) It is recommended to use filtered or distilled water and refresh it every 2 days. (5) The cartridge, filter, and cotton pad are replaceable, and regular cleaning and filter replacement are necessary.
• EVOLUTION TO 3.0 WARM MIST HUMIDIFIERS: GLOBALLY PATENTED FOR TRULY SAFE PURITY The 1.0 basic boiling type operated like kettles, resulting in high energy consumption and loud noise. The 2.0 post-heating atomization type, where atomizers operate in hot water, suffered constant failures due to erosion and limescale. Now, MiraMix incorporates a globally patented structural design with 3.0 hybrid cool-warm mist technology. It features a hollow chamber and a removable isolator, scientifically dividing the chamber into storage and vaporizing sub-chambers. This not only solves the flaws of past generations but also achieves doubled output and lower energy consumption.
• TESTED TOUGH FOR PROVEN PROTECTION & TRANSPARENT ADVICE The Aeocky scale inhibitor cartridge works for 2500 hours even in 450 mg/L extreme hard water, which is harder than the water in most U.S. households, meeting strict scale-inhibition standards. Many others claim lifespan until total failure, misleading users into poor protection. We define filter end-of-life when the scale inhibition rate drops to 60 percent, not zero percent. Filter life increases inversely with hardness, and the scale inhibition efficiency decreases with the volume of water filtered and over time. It is therefore crucial to replace the filter regularly.
• AEOCKY DEFINES THE NEW SILENCE STANDARD FOR NURSERY-QUIET It features a virtually silent DC brushless turbo fan that is 26 percent quieter. The 7-degree tilted atomizer prevents bubbling noise and is housed in a heavy-duty aluminum casing with vibration-absorbing silicone pads. The double-layer U-shaped mist guide facilitates smooth movement for quieter operation. This is further enhanced by wrapped sound insulation with a hollow structure that effectively contains internal noise. Additional noise reduction is achieved through a reinforced PTC, isolated heating zone, and purification cotton pad, enabling instant mist production with safe, insulated heating and low energy consumption.
• THE ERA OF 3.0 FILTER TECH EVOLUTION HAS ARRIVED: SOURCE-LEVEL SCALE PREVENTION An air humidifier for babies should include filters to purify the water. First-generation silver ion filters have proven ineffective against scale, and second-generation demineralization cartridges are prone to rapid saturation, leading to a short service life. IonShield technology targets scale formation at the source. Third-generation ion chelation scale inhibitor works at the molecular level, achieving nursery-ready humidity. It transforms tap water into pure mist, removing 90 percent of scale to help protect infant and sensitive skin.
• DESIGNING EVERY DETAIL AROUND THE NEEDS OF MOTHERS AND BABIES Crafted with the well-being of both babies and parents in mind, the Aeocky humidifier combines thoughtful functionality with gentle performance. The MiraMix baby humidifier features a 6-liter tank offering up to 40 hours of continuous operation, eliminating nighttime refills for uninterrupted sleep. With a 500 ml per hour output, it quickly relieves dryness in rooms up to 753 square feet. The double 360-degree adjustable nozzle directs airflow away from the crib or toward dry zones, achieving more balanced humidity for a nursery-optimized environment.
• THOUGHTFUL DESIGN FOR TIRED PARENTS: SIMPLE CONTROLS & SMART MODES With one-tap sleep mode, a single press turns off all lights and sounds, leaving only a soft moon icon to protect your baby’s rest. The high-precision humidity and temperature sensor provides enhanced accuracy, ensuring auto and constant humidity modes maintain ideal moisture levels throughout the room. The detachable nozzle design separates the mist outlet from the top cover, allowing it to be lifted without drips and refilled without the risk of overfilling the base. The child lock feature prevents accidental changes, and a simple 3-second press keeps settings safe from curious little hands.
