HDMI ARC Adapter, ARC Audio Extractor with Digital Optical TOSLINK SPDIF/Coaxial and Analog 3.5mm L/R Stereo HDMI ARC to RCA Audio Converter Compatible with HDTV Soundbar Amplifier

【HDMI ARC Audio Return】The HDMI ARC adapter can transmit the sound of the TV supporting ARC function back to the optical， coaxial， L/R channel and 3.5mm headphone port of the adapter through the HDMI/ARC interface， perfectly solving the problem that the TV without the audio output interface cannot connect to the sound system.

【Plug and Play】No need to install software or drivers， just connect your TV and audio equipment to get the sound. When ARC in， 3.5mm jack out， CEC function is supported， so convenient.

【192KHz Sampling Rate】It Actually Supports Sampling Rate at 32， 44.1， 48， 96 and 192 KHz， and 24-bit S/PDIF Incoming Bit Stream on Left and Right Channels. Please use AGW26 standard HDMI 1.4 cable (19+1)

【Support 5.1 Channels】The optical/coaxial interface of the hdmi arc audio extractor supports 5.1 channel output. Please make sure that the audio format is 5.1. Note: Set the optical port on the TV to source output (that is， the output is unchanged compressed audio)

【Simultaneous Audio Output】This HDMI arc to rca audio converter can simultaneously output audio from optical， coaxial， L/R and 3.5mm headphone port. Note: Please set the audio output to PCM or LPCM before using RCA and 3.5mm headphone stereo interface.

【Wide Compatibility】 Compatible with Soundbars， speakers and amplifiers for all ARC-enabled HDTVS and all audio devices with optical/coaxial /RCA/ 3.5mm ports. Note: Make sure to connect the TV's HDMI ARC port and switch the adapter switch to ""On"".

You Will Get: 1* ARC audio adapter， 1*USB power cable， 1* User manual (package does not include power plug)

Common Problem

Non-Audio 1. Whether the adapter switch is ON

Non-Audio 2. Check whether the TV supports ARC

Non-Audio 3. Whether the ARC function of the TV is switched on

Non-Audio 4. Whether the HDMl cable is connected to an HDMI port that supports ARC

Non-Audio 5. Whether it is AGW26 standard HDMI 1.4 version of the HD cable (low version of the cable no ARC function)

Port Have Noise 1.Set the TV to stereo output (PCM/LPCM2 channel output)

Non 5.1 audio output 1.Check that the audio format currently being played is 5.1 channels(Non 5.1 audio output with coaxial SPDIF)

Non 5.1 audio output 2.Set the TV fiber port to source output (For example: Output unchanged compressed audio)