Skip to main contentSkip to footer
Slide 1 of 7

Overview

The Micro Swiss FlowTech hotend is designed for the Creality K2 Plus. Its permanently sealed nozzle and thermal break help prevent leaks, while cold nozzle changes require no hot tightening. The included 0.4 mm CHT nozzle supports flow rates up to 50 mm³/sec for faster printing and improved layer adhesion.

Microswiss FlowTech™ Hotend for Creality K2 Plus - FlowTech CM2™ CHT - Hardened Tip - High Flow

Model: M3111
Web Code: 20007002
Sold and shipped by | 5.0 seller rating (1 review)

Available for deliveryAvailable online only

Delivery times vary by location. Most Marketplace items leave sellers' locations within 2 business days. Allow additional time for shipping.

Seller Return Policy

Read return policy

Warranty Information

Check with the manufacturer for details.

For Quebec residents: See the Availability Guarantee disclosure in the Specifications section below.

FlowTech™ Hotend for Creality K2 Plus

Microswiss FlowTech Hotend is designed with advanced features for optimized performance. Paired with Bondtech CHT High Flow Nozzles, this hotend delivers up to 50 mm³/sec for ultra-fast printing without compromising quality. Installation is simple and plug-and-play, allowing you to integrate it seamlessly into your Creality K2 Plus printer

Features:

•

•

Leak-Proof Nozzle:

Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.

•

Cold Nozzle Change:

Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.

•

CHT High Flow Nozzle Performance:

An official collaboration between Microswiss and Bondtech brings the CHT High Flow nozzle to the FlowTech ecosystem. This nozzle incorporates proprietary CHT technology, specifically engineered to boost the flow rate and improve layer adhesion.

•

High Flow CHT

The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec

•

Better layer adhesion

More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers

•

All-Metal Design:

Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.

•

Made in USA by Micro Swiss

What's in the Box:

• 1x FlowTech™ Heater Core

1x FlowTech™ CM2 CHT 0.4mm Nozzle

1x Heatsink

2x Titanium Mounting Screws

1x Silicon Sock

Made in USA by Micro Swiss

What's in the Box:

• 1x FlowTech™ Heater Core

1x FlowTech™ CM2 CHT 0.4mm Nozzle

1x Heatsink

2x Titanium Mounting Screws

1x Silicon Sock

For Quebec residents – Disclosure under the Consumer Protection Act

In compliance with Bill 29, Best Buy and third-party sellers on Best Buy Marketplace do not guarantee the availability of replacement parts, repair services, or maintenance information for any products. Coverage provided through any Best Buy Protection programs and applicable manufacturer warranties, if any, remain in place. Please contact the manufacturer directly for information about their availability guarantee.

Shipping Charges

Free standard shipping may be available on orders over a minimum amount (before taxes, fees, and promo codes). Shipping charges may vary based on item size and your shipping address. Want a shipping charge estimate? Simply add an item to your cart, then access the cart and enter your postal code in the shipping estimate section.

Processing Time

Most items ship within 2 business days after an order is placed*. Allow additional time for shipping to your address.
*Please note: If an item you ordered becomes unavailable, you'll be notified and a full refund will be processed within 2 business days.

Shipping Area Restrictions

Shipping is not available in the following areas*:
  • No restrictions in Canada
*Please note: Shipping area restrictions may vary for large items. If an item can't be shipped to your address, we'll let you know during the checkout process.
See our return policy to find specific return information for this product and steps on how to return by mail.