R410A R22 valve core remover installation tool with dual size SAE 1/4 and 5/16 ports, used for R404A R407C R134A R12 R32 HVAC system
[Professional Assistant] Used for disassembling and installing valve cores in live systems. Quickly and conveniently replace the leaking valve core. Dual size, used for R410a or R22 charging systems or other retrofit replacement systems.
Exquisite workmanship The installation tool for the valve core remover is made of solid brass, which is durable and not easy to rust; The metal knob adopts an anti slip rolling flower design, which is durable and can be used for a long time.
Time saving Core removal tool, easy to insert into the inner valve, control the core, no need to stop or release refrigerant, easy to disassemble and install the valve core, saving hours of emptying and filling time.
Basic operation of valve core disassembly wrench:
1. Pull out the dead center on the valve stem, close the valve on the tool, adjust the connection between the tool and the air conditioning interface, and tighten the valve on the air conditioning.
2. Ensure that the tool is tightly connected to the air conditioning valve, and then open the valve on the tool. Push the valve stem into the air conditioning valve and gently rotate the tail knob of the disassembler. Find the angle to connect the valve core, and then release it.
3. After removing the valve core, pull out the valve stem, close the valve on the disassembler, loosen the screw at the end of the tool, and remove the valve core. The work is done!
Attention: It is recommended to close the valve wrench valve and disconnect the internal connection of the air conditioner before disassembling the valve core.
standard:
Project: Valve core disassembler installation tool, R410a valve core disassembly tool, R22 valve core disassembly tool, a/c valve core disassembly tool, HVAC valve, valve core disassembly tool, Schrader valve core disassembly tool, pressurized small split system refrigeration and air conditioning service.
Repair ports: 1/4 inch and 5/16 inch SAE internal threads
Bypass port: 1/4 inch SAE external thread
Note: Lighting and different displays may result in slight color differences between the items in the image and the actual product. The allowable measurement error is+/-1-3cm.
What's in the box
1 x Valve Core Disassembler Installer
1 x Valve Core Remover
10 x 5V1 Valve Core
