2pcs Single Operation Amplifier OPA892 with Low Distortion/Noise/200mA High Current

The bandwidth is 290MHz

The slew rate is 700V/μ s

The stabilization time is 30ns

(0.1%), gain of 10VN

OPAx892 remains stable at gains of 10 or higher and -9 or lower

Description

The bandwidth is 290MHz

The slew rate is 700V/μ s

The stabilization time is 30ns

(0.1%), gain of 10VN

OPAx892 remains stable at gains of 10 or higher and -9 or lower

These amplifiers have a high driving capability of 200mA

Each amplifier only consumes 7.5mA of power supply current

OPAx892 has a total harmonic distortion (THD) of -68dBc at f=1MHz, designed specifically for applications that require low distortion

Due to maintaining low distortion within a wide output voltage range

OPAx892 is suitable for large dynamic range applications such as imaging, sonar, and audio

Production materials

The core operational amplifier is a genuine single operation OPA892 patch SOP8 package

Surface mounted SOP8 package to direct insertion DIP8 package

The direct insertion device will conduct high-precision AP testing on each chip to verify residual noise (usually in uV) and THD (usually in 0.00%), so you can buy with absolute confidence!

Residual noise: uV

Signal to noise ratio: 1 * *. 5dB

Dynamic range: 1 * *. 9dB

THD distortion: 0.0000 * *%

THD+N distortion: 0.000 * * *%

Intermodulation distortion: 0.000 * * *%

Frequency response bandwidth: ± 0.050dB

Colour: As Shown

Material: PC

Package Contents:

2*single operation amplifier

Only the above package content, other products are not included.

Note: Light reflection and different displays may cause the colour of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.