4 Channel 360°Dash Cam Front and Rear with 128GB Card,WiFi App Control,WDR,3" IPS Screen,4-Way Dash Camera with 24H Parking Mode,IR Night Vision,G-Sensor,Loop Recording

24-Hour Parking Mode & Surveillance System: Protect your vehicle even when parked with collision detection and time-lapse recording modes. This 4-channel dash cam provides comprehensive 24-hour parking surveillance (a hardwiring kit is required; not included). ① Time-lapse recording: Continuously monitors at a rate of 1 frame per second, effectively saving storage space. ② Collision detection mode: Automatically saves and locks a 10-second video clip.

Enhanced Night Vision & WDR Technology: Equipped with 8 infrared night vision lights and WDR technology, this dash cam captures clear details even in low-light conditions. WDR automatically balances brightness and contrast to reduce glare from headlights, streetlights, and sudden light changes, delivering sharp and balanced footage day or night.

Loop Recording & G-Sensor Dashcams: This dash cam comes with a pre-installed 64GB memory card, ready to record instantly. Loop recording ensures continuous footage. The built-in G-sensor automatically detects sudden shakes or collisions and locks the footage to prevent it from being overwritten, even during loop recording. When an incident is detected on the road, the relevant footage is automatically locked and protected.

WiFi & App Control: Connect to your smartphone via built-in WiFi to preview all four camera feeds in real time, download recordings, and instantly share clips—no need to remove the SD card. The 3-inch IPS screen supports quick playback and settings adjustments. A 128GB SD card is also included, ready to use out of the box, allowing you to start recording immediately with peace of mind.

Easy Installation: Clean and dry the windshield surface, stick the electrostatic film and squeeze out air bubbles, then mount the dash cam base with 3M adhesive.

The red wire within the rear camera main cable is the reversing trigger wire. It activates the reversing guide lines once connected to a 12V power source. When the vehicle shifts into reverse gear, reversing guide lines will appear on the rear display of the dashcam. If you do not require this feature, you can leave this wire disconnected. The daily recording function of the dashcam will remain fully operational.