Now there's an easy way to enjoy the AT-LP60XBT wireless belt-drive turntable straight out of the box. This turntable/speaker system combines the AT-LP60XBT with a powerful wireless speaker to give you great-sounding audio from your vinyl with no additional audio equipment required. Set the turntable up, pair it with the speaker, place the speaker anywhere within the 30-foot operating range, and then sit back and enjoy your records.
Of course, the AT-LP60XBT can also be used as a traditional wired turntable (and with other wireless speakers and headphones, as well). But however you choose to listen, the turntable will give you outstanding audio reproduction with the ease of automatic operation controlled by the Start and Stop buttons on the front of the unit. Theres also a button that lifts and lowers the tonearm, allowing you to operate the turntable manually if you choose.
The AT-LP60XBT-BK plays both 33-1/3 and 45 RPM records and includes a Dual Moving Magnet[trade] cartridge with replaceable stylus that is integrated into the tonearm for assured performance and ease of setup. The turntable comes with a 45 RPM adapter, a dual RCA output cable (for wired connection) and a removable hinged dust cover.
Features * AT-LP60XBT-BK turntable and portable speaker deliver powerful, full-range audio via a Bluetooth wireless connection
* Turntable connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
* Compatible with the high-quality Qualcomm[reg] aptX[trade] audio codec
* Fully automatic operation with two speeds: 33-1/3 and 45 RPM
* Anti-resonance, die-cast aluminum platter
* Integral Dual Moving Magnet[trade] phono cartridge with replaceable stylus
* Switchable built-in preamplifier enables wired connection to components with or without a dedicated phono input
* Turntable includes 3.5 mm (1/8") stereo mini-plug (male) to dual RCA (male) output cable, 45 RPM adapter, and removable hinged dust cover
* Speaker's two 73 mm (3") drivers and passive radiator provide clear, full-range audio with enhanced bass
* Speaker is equipped with power, play/pause, volume and hands-free calling buttons, built-in mic, and 3.5 mm (1/8") audio input jack
* Speaker's internal battery supplies 12 hours of continuous playback
* Speaker includes 3.5 mm (1/8") stereo mini-plug (male) to 3.5 mm (1/8") stereo mini-plug (male) AUX cable, and 61 cm (2') USB-C charging cable
Specifications Type: Belt drive turntable, fully automatic
Motor: DC servo-controlled
Speeds: 33-1/3 RPM, 45 RPM
Turntable Platter: Aluminum
Wow and Flutter: Less than 0.25% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio: >50 dB (DIN-B)
Output Level: Preamp "PHONO": 2.5 mV nominal at 1 kHz, 5 cm/sec Preamp "LINE" 150 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
Power Supply Requirements: 100 to 240V, 50/60 Hz, 0.6 A Max.
Power Consumption: 1.5 W
Dimensions: 359.5 mm (14.15") W x 97.5 mm (3.84") H x 373.30 mm (14.70") D
Weight: 2.6 kg (5.73 lbs.)
Accessories Included: 3.5 mm (1/8") stereo mini-plug (male) to dual RCA (male) output cable; AC adapter; 45 RPM adapter; felt mat; platter (with drive belt); removable hinged dust cover
AC Adapter: 12 V, 2 A
Replacement Stylus: ATN3600L
Communication System: Bluetooth Version 5.0
Maximum RF Output: 10 mW EIRP
Maximum Communication Range: Line of sight - approx. 10 m (33')
Modulation Method: FHSS
Compatible Bluetooth Profile: A2DP
Support Codec: SBC, Qualcomm[reg] aptX[trade] audio
