Designed for use with guitars, the ATM350GL UniMount mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491G guitar mount and strong, flexible AT8490L 9" gooseneck, the mic can be securely fastened to a guitar or other stringed instrument with a body depth of 90-135 mm.
The microphone's cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.
Features
* Low-profile mic design for minimum visibility
* Crisp, clear, well-balanced microphone response, even at high SPLs
* Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
* UniMount guitar mount with thumbscrew-adjustable clamp attaches securely to guitars and other stringed instruments with body depths of 90-135 mm, and provides excellent shock resistance for the microphone
* Rugged UniMount 9" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
* In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
* Interchangeable elements available for hypercardioid and omnidirectional polar patterns
* Included violin mount with hook-and-loop fastener provides an additional mounting option
System Includes
* ATM350a Cardioid Condenser Microphone
* AT8543 Power Module
* AT8491G UniMount Guitar Mount
* AT8490L UniMount
* 9" Gooseneck
* AT8468 Violin Mount (hook-and-loop fastener)
* Protective Carrying Case
Specifications
ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 40 - 20,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY: -49 dB (3.5 mV) re 1V at 1 Pa
IMPEDANCE: 200 ohms
MAXIMUM INPUT SOUND LEVEL: 159 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical): 130 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 65 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 11- 52V DC, 3.5 mA typical
SWITCH: Flat, roll-off
WEIGHT (MICROPHONE): 14.5 g (0.5 oz)
WEIGHT (POWER MODULE): 90 g (3.2 oz)
DIMENSIONS (MICROPHONE): 37.8 mm (1.49") long,
12.2 mm (0.48") maximum body diameter
DIMENSIONS (POWER MODULE): 92 mm (3.62") long,
18.9 mm (0.74") diameter
OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
CABLE: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector
