High accuracy electrochemical sensors: Carbon monoxide detectors can effectively monitor carbon monoxide gas according to the electrochemical sensors. When carbon monoxide gas reaches a certain standard, CO alarm will alert you. This will reduce the risk of carbon monoxide poisoning in your home.
Battery powered: Carbon monoxide alarm is battery powered, which is no need to plug in. Therefore you can more easily to install and use the CO detector. Even if the power failure, it will not affect the continued use of the carbon monoxide detectors . Note: Please remember to replace the battery of carbon monoxide alarm after a period of time.
Easy to use: CO monitor is does not need to be plugged in to use, so it is very easy to install. If you want to use CO detector, just put the battery in and turn on the switch button. When the concentration of carbon monoxide reaches the alarm standard, the CO alarm will emit a harsh alarm sound. The flashing green light of carbon monoxide detectors will turn red.
Digital screen display: Equipped with a digital display, these carbon monoxide alarm provide clear and accurate readings of carbon monoxide levels, 50ppm- alarms within 60~90 minutes, 100ppm- alarms within 10~40 minutes, 300ppm- alarms within 3 minutes.
Multi-scenario use: Whether it's a residential setting, commercial kitchen, restaurant, hotel, or office space, carbon monoxide detectors are designed to be effective and efficient at detecting potentially harmful levels of CO gas and emit an alarm of 85 decibels, ensuring the safety of occupants. You can even take it outside and use it.
Operation Instructions
fire alarms smoke detectors
Installation Guide:
1. Remove the back cover: Rotate the alarm unit to detach its back cover.
2. Mounting location: Choose a suitable location for your CO Alarm. Drill two 5mm holes vertically into the ceiling or wall, spaced 60mm apart.
3. Install components: Install the components in the following order: plastic plugs, back cover (ensure the arrow points downwards), then screws. Finally, secure the carbon monoxide alarm body to the bracket.
4. Attach the alarm: Align the arrow on the back of the alarm body with the arrow on the installed back cover. Rotate the alarm unit to snap it securely onto the bracket.
5.Test the alarm: Press the test button. The LCD will display "000 ", the red LED will blink, and the unit will emit three "chirp" sounds for several seconds. Afterwards, the green LED blinking once every 30 seconds indicates normal operation.
Note: Please remember to replace the battery of carbon monoxide alarm after a period of time.The co detector needs to be tested once a week!
What happens during the self-test after pressing the button on the installed alarm?
Post-installation, press test button for self-test: LCD shows "000"; red LED flashes with 4 beeps (twice). Display then darkens; green LED flashes every 30 seconds confirming normal operation.
How to perform the self-test on the alarm?
Generate test smoke via smoldering newspaper (extinguish flames) or lit cigarette.Hold 2 inches below detector.Observe rising numbers when gas detected.Functional units sound 85dB alarm within 1-2 minutes.Clear smoke and press reset to complete test.
What does "Err" on the alarm screen indicate?
Indicates a carbon monoxide alarm display malfunction. Please contact after-sales support.
What do the different colored flashing lights indicate?
Green LED flashes every 30 sec (normal operation). Red LED flashes with alarm when dangerous CO levels detected.
What's included in the product package?
1 Pack includes: 1 * Carbon Monoxide Detectors, 2* Expansion Screws, 2*Anchor Plugs,1*User Manual, 3* AA 1 .5V batteries(Batteries are added in increments according to the number of products)
