CT Sounds AT-1400.1D 1400W RMS Monoblock Car Audio Amplifier

About: CT Sounds AT-1400.1D 1400W RMS Monoblock Car Audio Amplifier

The CT Sounds AT-1400.1d Monoblock Car Audio Amplifier will deliver the power you need to destroy the competition in the SPL lanes. Engineered to be the best in its class, the amplifier uses an advanced PCB board featuring Korean capacitors, MOSFET pulse width modulated power supply, high-quality transformers, and cutting-edge inductors. The amplifier comes equipped with a 4-way protection circuitry along with a Diode 5402 & 6A60 for reverse polarity protection.

The plexiglass backing, illuminated LED CT Sounds logo, and white chassis gives this amplifier an unbeatable appearance. Not to mention the amplifier comes with the highly sought-after AT Series On/Off Bass Knob which not only lets you adjust the bass boost but also displays your system voltage.

Variable adjustment controls feature gains, subsonic, bass boost, low pass filter, and phase settings so you can get the exact sound you are looking for out of your amplifier. The car monoblock amplifier is strappable (slave/master switch) so that you can get more power output should your system require it. Whether you’re looking to cause a tectonic disturbance or generate dynamic instability in the atmosphere, the CT Sounds AT-1400.1d has the power to create the sonic explosion you crave.

Product Highlights:

RMS Power: 1Ω @ 12.8v: 1400 Watts x 1-Channel

RMS Power: 2Ω @ 12.8v: 700 Watts x 1-Channel

RMS Power: 4Ω @ 12.8v: 350 Watts x 1-Channel

Power & Ground Input Size: 0 Gauge

Speaker Input Size: 8 Gauge

Features:

MOSFET PWM (Pulse Width Modulated) power supply

Soft turn on circuitry

1 ohm stable mono operation

Thermal, DC offset, overload and speaker short protection inbuilt

Nickel plated tiffany style RCAs, thus low resistance inputs to the amp

LED power and protection indicators

It comes with Remote Bass Knob; therefore allowing you to control power on/off or subwoofer bass level easily

This is a purely Class-D amplifier where the audio amplification is solely controlled by electronic amplifying switches inside; making the gain much more effective and enthusiastic

Specifications:

No of channel: 1

Frequency response (-3dB): 10Hz ~ 250Hz

Gain adjustment: 0.2v ~ 5v

Subsonic adjustment: 10Hz ~ 50Hz

Phase adjustment: 0o - 180o

Bass boost: 0dB - +18dB

Signal to noise ratio: 100dB

Damping factor: 180

Minimum speaker impedance: 1Ω(ohm)

Low pass filter: 35Hz ~ 250Hz

Bass level remote control (16.4ft): Yes

Power/Ground wire inputs: 1/0 AWG

Speaker wire inputs: 8 AWG

Operating voltage (-ve ground): DC 12v

Strappable: Yes; Master/Slave switch

Bass knob: AT Series Bass knob included (Remote gain control, clip light indicator, built in voltmeter & push-able on/off switch)

Dimensions (W x H x L): 192 x 56.7 x 420 mm