For Raspberry PCIE to M.2 NVME SSD Interface Expansion Board Module,C

1. For PCIE to M.2 SSD expansion board, supports PCle x1, supports Gen2 and Gen3 modes, supports 2242/2230/2280 specification SSD, supports booting from NVMe solid state drives and storage expansion

2. SSD can also be used for storage expansion alone, and the system is booted from a TF card; the for 5 motherboard has a built-in PCIE expansion interface, and this product is suitable for PCIE external M.2 solid-state drive expansion.

3. Support 2242/2230 size SSD

4. I support PCle x1, Gen2 and Gen3 modes

5. Onboard power indicator (PWR) and M.2SSD activity indicator (ACT)

Model:PCIE to M.2 NVME

Purpose:for 5th generation solid state drive expansion board

Expansion board usage instructions:

1. The power circuit of the expansion board adopts a 2A current design. It is limited by the current limit of the PCle interface of the for 5 (5V1A) and can provide an output of more than 3.3V1.5A to the solid state drive.

2. Normally the rated current of an SSD can be 2.5A, 2.7A or even 3A, but these currents correspond to the limits of X4 mode

3. Since for 5 only supports X1 mode, the actual current used is much less than the rated current. Our design meets the needs of most hard drives.

Note:Due to different production batches, the colour of the motherboard be different, and the appearance, colour, and printing of the product be different, which does not affect the use.

Type:C:Version 2230

Colour:Random Colour(Colour is random and cannot be specified)

Material:PCB

Package Contents:

1 * Expansion Board

1 * Connecting Cable

4 * Fixed Copper Pillars

Only the above package content, other products are not included.

Note: Light reflection and different displays may cause the colour of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.