Gravity sensor timer, visual kitchen timer, electronic countdown timer, student time reminder - white

Product parameters: Battery capacity: 500mAh, operating temperature: 0°C-50°C, standby power consumption:

Sleep power consumption:

Volume: mute/vibration, loud 90~100DB, soft 70~80DB;

Product operation instructions: Gravity mode: turn the button to mode 1

Flip 5-10-30-60 minutes upward, automatically start countdown, flip the screen upward to pause, reverse the screen downward to clear the countdown

Manual mode: turn the button to mode 2

Adjustable M/S key, press the middle button ST/SP to start countdown

Positive timing: 1. When the display is 00: At 00:00, short press the [SP/ST] key to start counting up;

⒉ During the timing process, short press the [SP/ST] key to pause/start counting up;

3. In the pause state, long press the [ST/SP] key to reset.

Countdown setting:

1. Short press the [M/S] key to adjust the countdown time incrementally, long press the [M/S] key to quickly adjust the countdown time incrementally. After setting, short press the [SP/ST] key to start the countdown;

⒉ During the timing process, short press the [SP/ST] key to pause/start the countdown;

3. In the pause state, long press the [SP/ST] key to reset;

4. After the countdown time reaches 00:00, there will be a one-minute alarm ("di di di" LED screen lights up/sound stops LED screen goes out-these two prompts are 1 second a group-this cycle) to remind.

Silent mode vibration reminder.

5. Memory mode: After the countdown ends, short press the [SP/ST] key again to display the current set time. If you need to reset, long press the ST/SP button. Short press again to cycle the operation.

Notes:

1. If the user forgets to turn off the product, or there is no operation after 5 minutes, the product will automatically sleep;

2. After the forward/countdown is over, the alarm duration is 1 minute;

3. After sleeping, if the gravity mode is not turned off, it can be used immediately, and the manual mode can be adjusted immediately;

4. In silent mode, there is vibration feedback when the timing ends or any operation. In volume mode, there is a "beep" feedback;

5. When the battery is less than 10%, the screen flashes to remind you to charge. The red light is on during the charging process, and the green light is always on when it is fully charged.