Customer Reviews

[This review was collected as part of a promotion.] Nice kegerator for two “sixth kegs”....easily gets to 33-34 degrees. One improvement would be Perlick Faucets - easy change down the road.....regulator is nice easy adjustment for perfect pour minimal foam. Give it a try, you’ll like it!

[This review was collected as part of a promotion.] I am replacing a single tap micromatic kegerator. This was a great price and was delivered faster than promised. Packaging was good and after reading some of the reviews, I made sure there were no scratches or dings and there were none. The unit is nice looking and looks like great quality. Assembly was easy and all parts were there. Instructions we not the greatest, but I was able to get it done. I had to exchange my CO2 tank for a full one (cost only $15.00) at the local welding supply store. Sad to see my shiny new tank go, but I mounted the tank inside the fridge, so no one sees it. I added a second gauge from Amazon ($12.00) to the regulator that monitors the tanks pressure. I do not want to run out of gas on a Friday night and this was much cheaper than buying a second CO2 tank. So far I am getting a little foam when I pour the first beer off each line, so I am planning on getting longer lines for the taps. From everything I have read online, a tower cooler and longer beer lines are the only way to reduce this common issue. Two 5 gallon slim kegs fit with plenty of room to spare.

[This review was collected as part of a promotion.] I’ve had this for 3 years and I must say it’s the best thing I’ve ever purchased! I’ve had zero issues with it since I bought it. I love draft beer and this keg cooler didn’t let me down. The dual tap is nice to have but because product selection is limited in 1/6 and 1/4 kegs I usually end up just getting a full size 1/2 barrel. It’ll fit 2 1/4 slim kegs nicely which I was unsure of until I tried it. I think this is the best size if you’re going to use both taps as they last longer than the 1/6 kegs. I have a beer or 2 most nights and a 1/2 barrel lasts me anywhere from 2-3 months with problem, tastes as fresh as the day I tapped it.

[This review was collected as part of a promotion.] I do home-brew and have done a lot of research to try to find a good kegerator for my home-brew. This one did everything I wanted and was the best price, even better than the one Costco carries. If you want to use for home-brew you will have to buy some adaptors to fit it to your home-brew (corny) kegs. I spent about $30 at my local home-brew store getting everything I needed to convert it. This kegerator is a great combination of reasonable size and lots of inside space. First off you can easily fit 2 corny kegs and have room for a few 6 packs or what I do is keep about 8 chilled mugs ready for serving. I plan to add a third tap at some point because there is enough room (barely) for 3 corny's or 2 full corny's and one smaller keg you can set on the shelf where the CO2 tank goes (I keep my CO2 tank on the outside). There are 4 nice caster wheels on the bottom that make moving it around easy, 2 of them lock to keep it from moving around. Overall I highly recommend this! I got it on a deal of the day for under $400 and it shows up on deal of the day every once in a while. There is a single tap one also if you only want one type of brew but I highly recommend the 2 tap so you have the option of multiple brews.

[This review was collected as part of a promotion.] First of all, let me say I got this on sale for $449. By far the cheapest price I could find for a dual-tap kegerator. I use say, I don't really know what else you would be paying for by buying a unit that costs upwards of $1000. Keeps both kegs ice cold, very easy to set up and get to drinking. Plenty of extra hose for convenience when changing kegs. The only thing I would tell people is to be sure your fittings are all tight. My hoses came pre-assembled but as I was checking I had to tighten almost all of them. The tap handles are nothing special, but you can easily pick a pair up to your liking. You'll love yourself for buying this!

[This review was collected as part of a promotion.] Make sure if you want this that you need to first look for it on the deal of the day. I saved around $200 of the price. So it should be around $400. The fridge is easy to hook up and I am not a good do it your self guy! I am using what they call barrels instead of a keg. This way I can have 2 different beers. You have two options as to where you can put your CO2 tank. You can either put it inside or they give you an attachment to put on the back of your fridge. Keep in mind this is a basic kegerator. The shaft is made of plastic which is where the beer flows up to the tappers. So that is about the only thing I dislike about it.

[This review was collected as part of a promotion.] I purchased this Kegerator 6 weeks ago. I was a little concerned when it was delivered because the cardboard box it came in was damaged in one corner. After opening the box and examining the Kegerator it appeared to be ok. I was still a little concerned if it would work the way it was suppose to. All the parts necessary to assemble the Kegerator were included and it assembled very easy. I plugged it in and allowed to cool for approximately16 hours before putting in the first kegs. I purchased two 1/6 kegs and they went in very easily with plenty of room. It maintains a nice cold temperature and works very well. I am very happy with it. It was a great deal!

I have had my kegerator for three weeks now. It keeps kegs icy cold and the beer flowing. This is by no means a restaurant quality product however for the price and an enthusiast the best bang for the buck. The parts are basic materials are cheap but it works. Everything fits inside it says what it’s going to do and I was able to modify some of the parts to get a bit more performance out of it at a cheap price. Every time my friends come over they ooooh and aww over how great this thing works. Let’s see how it holds up. So far so good! Buy the warranty just in case and be sure to follow the ownership instructions on maintenance so your warranty doesn’t void.

[This review was collected as part of a promotion.] Flash sales purchase. Hadn't seen this good of a price for a two-tap system anywhere. Was happy once it arrived; as expected. Great entry-level kegerator that gets the job done and done well. I've had not trouble with maintaining temp with the kegerator in the house. It does seem to cycle on/off quite a bit, but no noticeable increase in monthly electric bill. Assembly instructions SUCK, but if you take your time you can figure it out. I have 2 ball-lock kegs hooked up (had to convert from the Sanke connections it comes with) and can actually cram a third inside just to keep refrigerated. Overall, very happy with the purchase.

[This review was collected as part of a promotion.] I got this and it sat for about 3 weeks while I figured out the set up and acquired some kegs from a local brewery. I set it up in a corner in our living room. It looks nice, works well, but this thing is LOUD and annoying. I've missed the 15 day return policy unfortunately b/c I didn't turn it on before then so I'm unhappy with this purchase. I've tried to find the source of the noise and it's coming from the compressor. Unfortunately this kegerator is probably going to be moved to the garage to avoid the annoying noise which is not what was wanted. Don't buy this product, or if you do, check it right away for noise so you can return it if it's a problem.