M.2 NGFF/mSATA SSD to SATA Adapter Board

When both M.2 and mSATA SSDs are installed on this adapter card, the M.2 SSD will be detected first, and the mSATA SSD will not function.

Two SSDs can be inserted at the same time, only one SSD can be recognized at a time, and the switch needs to be toggled to the corresponding position.

NGFF part of this adapter card is only suitable for B-key interface, not for M-key interface. Use of hard drives that do not support AHCI and NVME protocols.

Switch toggle design, the NGFF mode switch is toggled Right, the MSATA mode switch is toggled Left.

M.2 (NGFF) & mSATA to SATAIII Module

mSATA 52-pin male connector

M.2 (NGFF) B key male connector

LED indicates SSD power-on status, red LED indicates SSD operation status.

Specifications:

1. Supports SATA Reversion 3

2. Supports only SATA protocol B-key m.2 NGFF SSDs

3. PWM synchronous buck converter power IC

4. Provides a maximum current of 3 amps

5. Short circuit protection

6. Inrush current protection

7. Electrostatic discharge protection HBM (Human Body Mode)/2KV

8. Support M.2 NGFF SSD of 80mm 60mm 42mm 30mm

9. Support full-height and half-height size MSATA SSD

Colour: Black

Material: PCB

Package Contents:

1 * SATA To M2 NGFF SATA SSD Adapter

Only the above package content, other products are not included.

Note: Light reflection and different displays may cause the colour of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.