Multinautic Mooring Kit, black

Features:

The aluminum mooring cleats are angled 20 degrees toward the inside of the dock, thus distancing it from the hull of the boat;

Installed in an aluminum dock track like the one found on the QPF-495 models, the simple mechanism of the T-head bolts allows the mooring points to be relocated as needed;

Hexagonal bolts also allow installation directly on the decking;

Smooth and flexible yet strong, the 100% nylon mooring lines do not tangle. They are double braided and have a pre-spliced 30.5 cm (12 in) loop;

The 4.87 m (16 ft.) bumper and the corner bumpers, made of marine-grade PVC, are UV and mildew resistant, and the colour is incorporated into the material so it does not transfer to the hull. The side bumper can be easily cut to the desired length and can be installed horizontally and vertically.

The kit includes stainless steel pan head screws that prevent rust stains and tearing of the PVC;

Selection of black components for a modern look

Includes:

2 x Black dock lines

2 x Black corner bumpers

1 x Black bumper roll

2 x Cast aluminium dock cleat

100 x Stainless steel truss head screw

4 x Stainless steel T-head bolt w/nut

4 x Stainless steel hex bolt w/lock washer and nut

Specifications:

Dock line: 0.95 cm x 4.57 m (3/8 in. x 15 ft.) 0.33 kg (0.73 lb)

Bumper roll: 4.87 m x 8.25 m x 2.55 cm (16 ft. x 3.25 in. x 1 in.) 3.29 kg (7.25 lb)

Corner bumper: 25.4 x 25.4 x 11.44 cm (10 x 10 x 4.5 in.) 0.8 kg (1.76 lb)

Dock cleat 20.3 cm x 6.66 cm (8 in. x 2.625 x 2 in.) 284 gr (0.62 lb)

Box of 100 screws (#10 x 1”): 4.12 cm x 7 cm x 7 cm (1.625 in. x 2.75 in. x x 2.75 in.) 364 gr (0.8 lb)

T-head bolt w/nut 1/2”-13 x 1”: 3.18 cm x 1.9 cm (1.25 in. x 0.75 in.) 56 gr (0.12 lb)

Hex bolt w/lock washer and nut: 6.3 cm x 1.9 cm (2.5 in. x 0.75 in.) 56 gr (0.12 lb)

Warranty: 3-year