Rockford Fosgate R2-300X4 Prime Series 4-channel car amplifier — 50 watts RMS x 4

Rockford Fosgate's Prime Series R2-300X4 amplifier can power four speakers with 50 watts RMS each, so you'll hear your music clearly over the noises of the wind and road. You could also use this amp in bridged, 2-channel mode to power a couple of high-performance speakers or subs with 150 watts RMS each. High- and low-pass filters help you get maximum performance from the speakers in your vehicle. Rockford Fosgate's C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your music will sound as clean and powerful as possible. It's a simple system to use — turn it up until the light shows red, then turn it down until the red light goes out. Speaker-level inputs let you hook this amp up to almost any system, even a factory stereo. Product highlights:

4-channel car amplifier

50 watts RMS x 4 at 4 ohms

75 watts RMS x 4 at 2 ohms

150 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)

CTA-2006 compliant

Class-D amplifier design

variable high- and low-pass filters (50-250 Hz, 12 dB/octave) on front and rear channels

More Info:

C.L.E.A.N. gain setup system includes clip lights

auto remote turn-on

preamp and speaker-level inputs

preamp outputs

wiring, fuse, and hardware not included with amplifier

4-gauge power and ground leads and a 60-amp fuse recommended

dimensions: 10-1/16"W x 2"H x 7-3/4"D What's in the Box 4-Channel amplifier

Two 7" Speaker input harnesses

3mm Allen Hex key

Four 3/4" Screws

4 Flat washers

Installation and Operation instructions (English/ French/ Spanish/ German/ Italian)

Certificate of Performance

Rockford Fosgate contact information