饾棧饾椏饾椉饾棻饾槀饾棸饾榿 饾棗饾棽饾榾饾棸饾椏饾椂饾椊饾榿饾椂饾椉饾椈
路 20CrMnTi Carburized Steel
This PTO overrunning clutch is made of high-quality 20CrMnTi carburized steel, with a black-painted surface to strengthen its durability and stand large impacts, higher torque, and speed.
路 1-3/8" Round Ends
Designed with 1-3/8" round shaft ends, this tractor PTO link slip clutch is compatible with 1-3/8" implement end or tractor end shafts. It stands out with superior protective ability, and it is way better than the shear bolts.
路 Adjustable Torque
Eight tension springs enable you to adjust the torque easily. Tighten or loosen the nuts by 1/4 of a turn to increase or decrease the torque and check its tightness to ensure smooth operation.
路 Protective Friction Discs
The friction discs have already been assembled in the fiction lining, and they are replaceable. The torque of the PTO slip clutch can be adjusted from 20 hp to 55 hp, by turning the springs.
路 Compact Structure
Our PTO slip clutch consists of springs, friction plates, pressure plates, and a flywheel. It has two round ends attached to the engine / clutch shaft to perform the implements better.
路 Wide Application
Our PTO slip clutch has been widely used on rotary tilling attachments like rotavators, stone buriers, brush hugs, and rotary mowers. They can also be used as hay tenders, balers, hole diggers, etc.
饾棪饾椊饾棽饾棸饾椂饾棾饾椂饾棸饾棶饾榿饾椂饾椉饾椈饾榾
Material: 20CrMnTi Carburized Steel
Color: Black
Surface Finishing: Painted
Female & Male End Size: 1-3/8" Round
Pinhole Size: 1/2"
Tension Springs: Adjustable
Friction Discs: Replaceable
Rated Torque: 900 nm
Adjustment Range: 20 - 55 Horse Power
饾棧饾棶饾棸饾椄饾棶饾棿饾棽 饾棖饾椉饾椈饾榿饾棽饾椈饾榿
1 x PTO Split Clutch
路 Allow Two Speeds: Our PTO slip clutch limits the amount of torque being transferred from the tractor to the implement. This is accomplished by slipping or spinning free, which allows the two sides of the PTO shaft to spin at different speeds
路 Quality PTO Slip Clutch: The 20CrMnTi carburized steel which built this tractor PTO slip clutch has been reinforced to resist impact. The black-painted surface is smooth and anti-weary. So, it can withstand higher torque and speed to gain better protection for your PTO shaft.
路 1 3/8" Round Shaft Ends: Constructed with Round ends, this PTO clutch has a standard size of 1-3/8" for both male and female ends. It perfectly matches the same diameter of implement input shaft and tractor output shaft, featuring superior safety functions as shear bolts.
路 Easy Torque Adjustments: Rated torque: 900 nm, adjustment range: 20 - 55 hp. You can adjust the length of the tension springs to acquire an appropriate torque for your rotary cutter slip clutch. Just tight / loose the eight nuts by 1/4 of a turn and check its tightness for correct operation.
路 Replaceable Friction Discs: The PTO slip clutch adopts an essential spring and disc set-up. It is assembled with fiction discs inside to help transmit forces. It is most commonly used on rotary tilling attachments like rotary cutters, brush cutters, rotary mowers, and tractors.
