𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗗𝗲𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻
· Value-Packed Repair Choice
If your steering wheel shakes, the body vibrates, or grease is flinging from the inner edge of your tires, your CV joint axle may need replacing. Swapping out the CV axle now can help you avoid bigger risks like broken shafts or seized joints. Check your vehicle compatibility before ordering.
· Engineered to Fit
This front CV axle shaft assembly meets OEM standards. Spline ensures proper tooth alignment. Reference Numbers: CARDONE New: 66-5397, 66-5407; CARDONE: 665397, 665407; GSP: NCV69054, NCV69055, NCV69184; Hollander: 447-51348R, 447-51352L; Toyota: 4342008020, 43410-08030; TrakMotive: TO8324, TO8333.
· Keeps Sealed and Smooth
A torn boot is one of the top reasons front CV axles fail. That's why ours features a durable, flexible rubber boot pre-filled with grease. It flexes with your suspension and steering, handles small bumps and angles with ease, and keeps out dust and water.
· Crafted with Quality
Every inch of this front passenger CV axle is carefully machined and precision-cut. It's made from high-strength alloy steel and carbon steel—built to handle heat, wear, and whatever your daily drive throws at it.
· Easy to Install
Our driver side CV axle comes with the output shaft nut and ABS ring pre-installed, making it easier for you to get the job done. Whether you're a garage pro or weekend DIYer, this axle makes replacement less of a headache.
· Stay Safe During Setup
Support your vehicle with jack stands—never rely on just a hydraulic jack. Use wheel chocks to stop the car from rolling during the drive axle installation. Security isn't optional.
𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀
Item Model Number: A3-8-020A, A3-8-021A
OEM Numbers: Left 4342008020, Right 43410-08030
Overall Compressed Length: 28-30 in/710-760 mm (Left); 40.4-42.4 in/1026-1076 mm (Right)
Installation Position: Front Left & Front Right (Driver and Passenger Side)
Input Shaft External Spline Count: 24
Output Shaft External Spline Count: 30
Main Materials: Alloy Steel & Carbon Steel
Product Weight: 42.1 lbs/19.1 kg
Product Dimensions (Left): 28 x 4 x 4 in/710 x 106.5 x 106.5 mm
Product Dimensions (Right): 40.4 x 4 x 4 in/1026 x 106.5 x 106.5 mm
𝗣𝗮𝗰𝗸𝗮𝗴𝗲 𝗖𝗼𝗻𝘁𝗲𝗻𝘁
2 x CV Axle Shafts
1 x User Manual
· Vehicle-Specific Fit: This front CV axle shaft assembly fits driver and passenger sides, compatible with 2004-2010 Toyota Sienna. A go-to choice for replacing axles on multi-purpose recreational vehicles
· OEM-Level Precision: OEM Numbers: Left 4342008020, Right 43410-08030; Overall Compressed Length: Left 28–30 in, Right 40.4–42.4 in. The CV joint axle features a 24-tooth external spline input shaft and 30-tooth external spline output shaft
· Sealed Neoprene Boot: The tough neoprene boot seals the joint from dirt, sand, and road mess. It is pre-greased with high-temp moly grease that stays put, even under heat and stress, so your front passenger CV axle stays running smoothly and quietly
· Built to Last: Our CV axle is made with alloy steel and carbon steel for strength you can count on. It handles commutes, long highway hauls, and a bit of light off-roading without flinching. No more worrying about early wear or annoying shakes
· Easy Installation: We pre-installed the output shaft nut and ABS ring—less hassle for you. Just pop the old front CV axle out, adjust the new one into place, lock it in, and you're good to go
