Wi-Fi 2.4 GHz Signal Booster
A signal booster can increase the range of your Wi-Fi network, extending the signal over a greater distance and eliminating dead zones, so you can use your network anywhere in your home. You don't have to worry about a weak signal due to distance, walls, and floors.
Product Benefits
AP Mode - allows you to connect the router to the repeater with a LAN cable. This creates two separate network points. This does not affect the signal/data quality.
Repeater Mode - allows you to connect the repeater to the router wirelessly. This allows you to extend the range without having to connect unnecessary cables.
Various encryption modes.
High transmission speed of up to 300 Mbps.
Technical Specifications
Material: ABS
Frequency: 2.4 GHz
Required power supply: 110V-230V wall socket
WPS: Simply press the WPS button to browse the internet securely.
Compatibility: Compatible with 802.11n/g/b devices, Windows, Mac, Linux, iOS
Standards: EU plug
Color: White
Maximum number of people using the device: Up to 10 people
Transmission power:
Wireless range: Up to 100 m (In open areas, range may be lower within the area) (be)
Antennas: 2 built-in
Data transfer: up to 300 Mbps
Security: WPS (64/128 bit), WEP, WPA/WPA2
Standards: IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
2 Operating modes: Repeater and AP.
The set includes:
Signal amplifier
User manual
Note: The cable is not included in the set!
User manual
Installation: If the device is working normally, search for the repeater with your phone and connect to it. If your phone doesn't automatically go to Settings after connecting, tap "Forget," turn off Wi-Fi, and then turn Wi-Fi back on to search or enter the code: 192.168.11.1
Repeater Mode Configuration:
1. Tap Repeater Mode to open the network search.
2. Select the Wi-Fi signal you want to extend and tap "Connect." If it's a hidden network, you'll need to select it manually.
3. Enter your router's connection password and tap "Next." If you don't want the same name as your router, choose a new name and enter it. 4. Tap the "Finish" button to complete the setup (by default, the extended Wi-Fi password is the same as your router's).
5. Exit Repeater Mode Setup.
AP Mode Configuration:
1. Click to select AP Mode and go to the settings page.
2. Set the name and password for the wireless network.
3. Click the "Finish" button to complete AP Mode setup. 4. Exit AP Mode.
Attention:
If there is a connection problem, reset the device using the "RESET" button. Press the button with a pin and hold it for approximately 8 seconds. Resetting will restore the product to its factory settings. You can then proceed with reconfiguring the device.
