ADS1115 Four 16-Bit ADC Module I2C Communication Module ADC Sampling Channel for Arduino Raspberry Pi MCU Sensors Test

The ADS1115 four-way 16-bit ADc module is based on the ADS1115 chip integrated peripheral filter circuit, I2C pull-up resistor module, expand the double row of 2.5 DAM spacing gold row pinholes and stamp holes, easy for users to weld and expand,

can also be directly attached to users' products, the module adopts 12c communication, support wide operating voltage. Use braided packing.

Main parameters:

Operating voltage :2.ov~5.5v

Programmable data transfer rate :8SPS to 860SPS

Built-in low temperature bleach reference voltage

I2c interface, device address can be configured

Can be configured for four single-ended inputs or two differential inputs

Foot position

VCC: power input (2.ov~5.5v>

GND: power source

SCL:I2 clock with built-in 10K pull-up

SDA:I2C data, internal 10K pull-up

AIN3:ADC sampling channel

AIN2:ADC sampling channel

AIN1:AIC sampling channel

AINO:AI sampling channel

Function introduction:

This module is used for data communication through Iac interface, the default I2c device address is b1001000x, length is 7 bits, x bit is read/write control bit. The write device address is b10010000 (oz90), and the read device address is b10010001 (ox91).

In addition, 2c address can be configured: short welding spot can be b1001001X.

Colour: Black

Material: plastic

Package Contents:

1*ADS1115 ADC Module

Only the above package content, other products are not included.

Note: Light reflection and different displays may cause the colour of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.