Demonfx TS.BREAKER guitar effect pedal Two Overdrive BLUESBREAKER And TS9 in one

Demonfx TS.BREAKER Guitar Effect Pedal Combined BLUES BREAKER And TS9 In One Pedal Add Order Toggle

Description:

TS.BREAKER is a dual overdrive guitar pedal and the ultimate tone machine, providing a variety of delicious tones. It can be used as an always on drive tone all the way to a mid boosting lead tone. Our take on the legendary TS9 Tube Screamer-style overdrive and the Black Box Bluesbreaker, it features two independent overdrives, giving you two classic drive sounds favored by many guitarists in one enclosure.

Our inspiration for the TS.BREAKER came from our enthusiasm for each of the two pedals used alone and by how amazing they sounded when stacked.

The TS.BREAKER is divided into a side Bluesbreaker(left) and a side TS9 (right), separated by the order toggle switch in the middle which flips the internal order of the effects and hence the signal path from guitar to amp.

Side B features the Bluesbreaker-style circuit with external knobs for GAIN, TONE, VOLUME and a two position toggle switch labeled CLIPPING. The clipping switch toggles between Two Clipping models soft and hard .

The side T features the TS9-style circuit with external knobs for DRIVE, TONE, LEVEL and a two position toggle switch labeled CLIPPING. The clipping switch toggles between Two Clipping models .

Both sides can be used separately or stacked.

TRS split: Besides using the two sides of 'TS.BREAKER in serial mode, either T->B or T<-B, . The two 1/4" jacks, which in serial mode are used for signal in and out, will in split mode serve as IN+OUT for each side.

PLEASE NOTE THAT THE EXTERNAL ORDER TOGGLE SWITCH MUST BE IN UP POSITION T <- B

Features:

Side B (left)

- Replica of the circuit of the first BB1 - Black Box Blues Breaker circuit.

- External two position clipping toggle switch for two models clipping response

Side T (Right)

- Exact replica of the TS9 -circuit.

- External two position Clipping switch to switch between a pair of si - or a pair of led clipping diodes in the overdrive gain stage.

External switch to choose in which order the signal passes through the two circuits.

Dimension:

115 mm x 95 mm x 35 mm

POWER:

The TS.BREAKER requires a regulated 9-volt DC power supply with standard 2.1mm jack tip negative polarity.

The max power consumption of the is 100mA (+9VDC). If operated with a power supply with insufficient current

capabilities, it will affect the performance. So make sure your +9V-DC power supply is capable of delivering 100mA.

We recommend you to use a quality power supply with isolated outputs.

Note:

Power supply not included.

Please use the 9V power adapter whose polarity is negative center otherwise, the product may not work properly.

Package List:

1 * Effect Pedal

1 * User Manual(English