About this item-
[Up to 9x Faster Charging Speed]: Provides up to 46 miles/hour charging speed via hardwired connection (48 amp - up to 9x faster than a standard wall outlet) or up to 38 miles/hour via the NEMA 14-50 plug (40 amp). Professional installation recommended for optimal safety and performance. [Install The Power Outlet Cord]: No smaller than 8AWG if charge 40-48A, we suggest 6AWG cord.(1.The input side is belongs to the electrician electric automobile regulation scope, need to use three 6AWG cable wires for 48A; 2.The charging cable belongs to the automotive connector certification standard, so the 8AWG cable can meet the 48A.)
[DESIGNED WITH J1772 Connector for All North America j1772 Connector EVs/PHEVs. Not fits for Tesla/Nacs Connector Cars(j1772 to Tesla adapter needed)]: Compatible with Tesla cars (Adapter needed, not included), Ford, GM, Audi, Kia, Honda, Kia, Hyundai, Gmc, Chevrolet Bolt, VW ID 4, Nissan Leaf, Ford Mustang Mach-E, IONIQ 5 2024 and before, BMW i3, i4, iX, Jeep Wrangler 4xe, etc. [Not fits for Nac connector cars-Kia EV6 2025/EV9,Ariya 2025&2025 loniq 5(J1772 to Tesla adapter needed)]
[Safety & Faster Charging with ETL, FCC/Energy Star Certified]: Meets the Safety Criteria Defined by: SAE J1772, UL2231-1/-2, UL 991, UL 2231, UL 2251, UL1998 and UL 2594. (ETL and FCC certified EV car charger with 3-year Warranty)
[Plug-play Mode(The Default Setting), Smart Touch Screen, No APP Needed]: Clearly show the charging amperage, charging speed, input voltage, delay time, etc. For the touch buttons: 1. Pull out the charging gun before press the buttons, otherwise no respond; 2. Long press "Ⓐ" or "Time" button to enter the setting interface, then you can adjust the amperage from 16A to 48A freely or Set the charging start time; 3. You can do "factory reset" if doesn't charging.
[Smart WIFI APP, You can Set the Charging Period]: By APP, you can wirelessly check the charging cost, history, fully-charged notification, track the charging status, during off-peak period, etc. [Wi-Fi Reset/Factory Reset Function, Add New Device Quickly]: If you can't find your device or you have replaced a new phone, just pull out the charging latches, simultaneously long press the Ⓐ button and time adjustment button on the product screen until it shows "Factory Reset", then wait 3-5 seconds and re-start your device.
[Nema Type 3 Protection Degree & 25ft Long Bold Cable]: Approved by NEMA Type 3, the NexCyber home ev charger has a certain extent of IP65 waterproof. (We don't suggest install in the direct sunlight or exposure rainy day.) Equipped with 25 feet military grade charging cable, the drop-resistant plug endures over 10,000 charges, super durable.
[Question & Answer: "E-Stop Fault" or "Stop Charging Suddenly after a while"]: Solutions: 1. Confirm whether the side big button "E-stop button" works normally. 2. Press the "E-stop" button, then recover the position. 3. Re-start your machine, then it will work normally. [Factory Reset Setting]: Press and raise the emergency stop button, repeat the operation three times, then restart your ev charger.
› See more product details-
Product Dimensions -48.3D x 25.4W x 40H centimetres
Output voltage -240 volts
Specification met -ETL, Energy Star, FCC
Input voltage -240 volts
Current rating -48 A
EU Spare Part Availability Duration -3 years
Amperage -48
Compatible devices -all smartphones
