Moen Canada Miso 8 is an Eight Output Effect Pedal Power Supply designed with a high efficiency transformer.
Each output is fully isolated, regulated and filtered,with over voltage protection.
The all aluminum anodized enclosure dissipates heat rapidly and keeps components cool.
The Miso 8 side mains voltage selector 110V / 220v ensures it working properly anywhere in the the world.
The Moen MISO 8 FX Power Supply powers, 9V, 12V & 18V effects pedals. Equipped with 2 adjustable outputs (9V-18V & 5V-9V) and 4 select-able outputs (9V or 12V), 9V' ensures all outputs to work with most every manufacturer's effects pedals on the market.
9V power options:
Outputs 1 - 6; An effects pedals that has the option of being powered by a 9V battery requires less than 70mA and can be powered by any outputs 1-6 set to 9V.
Outputs 7 - 8; Outputs 7 and 8 are designed for the higher current 9V effects pedals and switchers out now on the market,or a Daisy chain cable can be used to power more than one 9V pedals for these outputs depending on each pedal's current limitations .
12V power options:
Outputs: 3-6; When switched to 12V outputs 3,4,5,6 are designed to accept BOSS ACA type pedals and some digital modeling pedals.
18V power option;
Output 1; Begins at 9V and can be adjusted and up to 18V for pedals that require 18V.
Low Battery Simulation option:
Output 2; Can be adjusted from 9V down to 5V to be used to simulate a low battery which comes in handy if you have older transistor based distortion and fuzz pedals
What's Included:
• Moen Canada MISO 8 Power Supply
• AC Input cord
• 2 7.9” [20cm] Line 6 Converter Cables
• 2 19.7” [50 cm] Negative Center Output Cables
• 6 27.5” [70 cm] Negative Center Output Cables
• User's Manual & Warranty card
OUTPUT:
- All DC Outputs are regulated
- Over current protection on each output
OutputDC VoltageCurrent
19-18V50mA
25-9V100mA
3-59.6V/12.4V100mA/50mA
7-89V350mA
Features:
• Detachable AC power cord.
• 150W AC output outlet.
• Input AC voltage select switch 110/220V for international use
• All Outputs Isolated, Filtered with Over-voltage Protection
• Select-able input (100 -240V)
• 1 Auxiliary AC output
• Transformer based design with separate grounds for true isolation!
• Adjustable and select-able output voltages 5V -18V. 9Volts are available on all 8 DC outputs
• 3 customer threaded mounting power supply mounting holes. (mounting screws not supplied.)
• Size 6" x 3.5" x 1 3/4"
(*NOTE Please select the power supply's AC Switch to your country's power requirement of 110V or 240V before plugging the power supply to a wall outlet, failure to do so can result in permanent damage to the power supply and not covered by warranty.)
