Darkglass Microtubes X Ultra Distortion Pedal

The Microtubes X Ultra greatly expands on the already immense versatility of the Microtubes X7. Featuring all the great controls that its predecessor has that allows users to select exactly what frequencies they want to compress and saturate for the low and treble respectively, but with four major additions providing an additional layer of flexibility, while maintaining the same compact footprint, making it an extremely complete tool for the modern bassist.

Features

* Low Comp - Controls compression amount for the low band. Both threshold and makeup gain are controlled to maintain a constant level. This control is also used to control the compression amount when the compressor is enabled for clean signal in Darkglass Suite.

* Low Level - Sets the output volume of the low-pass signal.

* Low Pass Frequency - Controls the cut-off frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.

* High Level - Sets the output volume of the distorted high-pass signal.

* High Drive - Sets the amount of distortion for the high pass side.

* High Pass Frequency - Controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.

* Ground Lift - Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the 1/4" output.

* Cab Sim - Toggle the cabinet simulation on/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.

Specifications

Low Shelf: +-12 dB @ 80 Hz

High Shelf: +-12 dB @ 5 kHz

Dimensions: 125 x 96 x 57 mm (4.92 x 3.77 x 2.24 in)