For M.2 NGFF Dual Key A-E to PCI-E 16X Adapter Convert Cable 4Pin FDD Power Connector 270° for PCIe Tester Extender 20cm

This adapter cable allows you to connect any PCI-E device to M.2 Dual Key A-E slot through a standard PCI-E 16X port.

Supports M.2 socket with type 2230.

Supports 12V power by 4pin FDD power connector for standard PCI-E devices.

The speed will be limited to 16X due to M.2 speed limitations.

Using wire and connectors, it supports high-frequency PCI-E 3.0 stable transfer, and no drivers are needed for this adapter.

This adapter cable allows you to connect any PCI-E device to M.2 Dual Key A-E slot through a standard PCI-E 16X port. Supports M.2 socket with type 2230. Supports 12V power by 4pin FDD power connector for standard PCI-E devices. If your device doesn't need 12V power input, you won't connect this attached power cable. The speed will be limited to 16X due to M.2 speed limitations. Using wire and connectors, it supports high-frequency PCI-E 3.0 stable transfer. No drivers are needed for this adapter. Supports Win XP, Vista 32/64, Win 7, Win 8, Win10, Win11 or Linux and so on. System requirement: M.2 Key A or E slot on the motherboard. Sometimes this slot supports PCI-E WLAN (e.g., 9260 AX200); however, there exist exceptions. If your board only supports 9560 or AX201, it won't support this adapter cable because the system interface type of 9560 is CNVio2, not Wi-Fi (PCIe). Cable length is around 20cm, total length is around 22.5cm, and cable thickness is around 1.0mm. It's also a powerful tool for engineers or for PCI-E testers, extenders, and so on.

Color: Black

Material: plastic

Package Contents:

1*PCI-E extension cable

Only the above package content, other products are not included.

Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.