PRECISION-TUNED FOR AMP MODELERS
The cabinet design, 8” woofer, and HF compression driver are specially voiced for accurate, linear delivery of amplifier and cabinet emulations
BLUETOOTH® ENABLED
Stream music wirelessly from your mobile device into FRFR-108 MKII’s dedicated Bluetooth® channel
ALL THE CONNECTIVITY YOU NEED
Two combo XLR + 1/4” inputs with independent volume controls and an XLR direct output allow for chaining speakers or sending to a front-of-house mix
QUICKLY ADAPTS TO VENUES AND ROOMS
FRFR-108 MKII has a ground lift switch for eliminating noise issues caused by ground loops and a HPF EQ switch to help cut through muddy stage mixes
LIGHTWEIGHT, FLEXIBLE AND STURDY
Weighing just 21lbs / 9.53kg, FRFR-108 MKII is rugged yet easy to transport and can be used in a wedge, upright, or pole-mounted position
PERFECT PARTNER FOR AMP MODELERS
If you’re new to FRFR amplifiers FRFR stands for “full-range flat-response.” This special type of amplification is very important for amp modeling pedals and pedalboards, as your amplifier needs to sound pure and transparent, so it can deliver a true “amp in the room” sound without coloring it as a traditional guitar amp would. The FRFR-108 MKII is precision-designed to get the most out of your modeler and deliver all the intricacies of your amp and cab emulations, with enough volume to be ready for any stage, rehearsal, or jam session.
POWERFUL, PROFESSIONAL SOUND
2000 watts of peak power ensures you have enough headroom for
almost any live performance or rehearsal
PRECISION-TUNED FOR AMP MODELERS
The cabinet design, 8” woofer, and HF compression driver are specially voiced for accurate, linear delivery of amplifier and cabinet emulations
BLUETOOTH® ENABLED
Stream music wirelessly from your mobile device into FRFR-108 MKII’s dedicated Bluetooth® channel
ALL THE CONNECTIVITY YOU NEED
Two combo XLR + 1/4” inputs with independent volume controls and an XLR direct output allow for chaining speakers or sending to a front-of-house mix
QUICKLY ADAPTS TO VENUES AND ROOMS
FRFR-108 MKII has a ground lift switch for eliminating noise issues caused by ground loops and a HPF EQ switch to help cut through muddy stage mixes
LIGHTWEIGHT, FLEXIBLE AND STURDY
Weighing just 21lbs / 9.53kg, FRFR-108 MKII is rugged yet easy to transport and can be used in a wedge, upright, or pole-mounted position
PERFECT PARTNER FOR AMP MODELERS
If you’re new to FRFR amplifiers FRFR stands for “full-range flat-response.” This special type of amplification is very important for amp modeling pedals and pedalboards, as your amplifier needs to sound pure and transparent, so it can deliver a true “amp in the room” sound without coloring it as a traditional guitar amp would. The FRFR-108 MKII is precision-designed to get the most out of your modeler and deliver all the intricacies of your amp and cab emulations, with enough volume to be ready for any stage, rehearsal, or jam session.
FRFR-108 MK2 TECHNICAL SPECIFICATIONS
Output Power 2000 W
Drivers Low-Frequency: 8.0” (203 mm) driver, 2.0” (50 mm) high-temperature voice coil.
High-Frequency: 1.0” (25 mm) exit ceramic driver with 1.4” (35 mm) coil.
Crossover Frequency 2 kHz
Maximum SPL 129 dB (peak) dB-SPL @ 1 m
Frequency Response 62 Hz – 20 kHz (+/-3 dB)
Frequency Range 52 Hz – 20 kHz (-10 dB)
Horn Coverage 90° horizontal x 60° vertical (nominal)
Connectors (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced)
(1) XLR output (Link)
(1) IEC power cable input
Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced
Gain/Volume Control Range -∞ to 0 dB, +4 dBu nominal, +10 dBu for max output
HPF Switch 100 Hz
Bluetooth Version: 5.0
Profile: A2DP, AVRCP
Codec: SBC
Range: up to 100 feet (30.5m)
Power Connection: IEC
Input Voltage: 100-120V, 50/60 Hz; 220-240V, 50/60 Hz
Consumption: 1100W
Fuse: T15AL AC250V; 220-240V T6.3AL AC250V
Protection Electronic clip, thermal, and transducer overdrive protection
Mounting/Installation Standard 36 mm pole socket
Operating Temperature 14°F to 113°F / -10°C to 45°C
Dimensions (width x depth x height) 10.1” x 9.6” x 17.2”
256 mm x 245 mm x 436 mm
Weight 21.05 lbs.
9.5 kg
