From lecture halls to houses of worship to performance venues, SLX-D[reg] delivers transparent, 24-bit digital audio and rock solid RF performance with easy setup and rechargeability options in a suite of versatile wireless system configurations. Featuring single half-rack and dual full-rack receiver options, handheld and bodypack transmitters and a wide selection of vocal, lavalier, headset and instrument system configurations. Compatible with Shure UHF wireless antenna distribution and remote antenna accessories.
The SLXD4D receiver is a dual-channel receiver in a single housing. Featuring industry-leading digital wireless technology and design, the SLXD4D easily syncs wireless transmitters. A variety of interchangeable vocal microphone choices guarantees the right solution for a wide range of applications, from day-long conference to nighttime performances.
Features
* Transparent 24-bit audio
* Extended 20 Hz to 20 kHz frequency range
* 118 dB dynamic range
* Digital predictive switching diversity
* 44 MHz tuning bandwidth
* 32 available channels per frequency band
* Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
* Easy pairing of transmitters and receivers over IR scan and sync
* Automatic Channel Scan
* Compatible with Shure Wireless Workbench[reg] control
* Remote control via ShurePlus[trade] Channels mobile app
* Link multiple receivers for group scan and firmware updates via Ethernet port
* Third-party setup and control via Ethernet
* Elegant and easy-to-use interface with high-contrast LCD menu
* Guided setup mode installed in each SLX-D[reg] receiver
* Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
* Rugged metal construction
* System configurations include handheld transmitters with interchangeable microphone capsules, bodypacks with a range of lavalier, headset, earset and instrument micophones and single and dual rack-mountable receivers.
What's Included
1 - dual channel receiver
2 - 1/4 wave antennas
2 - bulkhead adapters
2 - 22" BNC cables
1 - power supply
2 - rack mount bracket (short)
1 - hardware kit
Specifications
Dimensions (H x W x D): 42 x 197 x 152 mm (1.65 x 15.5 x 5.98 in)
Weight: 1451g (3.2 lb) without antennas
Housing: Galvanized Steel
Power Requirements: 15 VDC @ 600 mA Supplied by external power supply (tip positive)
RF INPUT
Spurious Rejection: > 75dB typical
Connector Type: BNC
Impedance: 50 ohm
AUDIO OUTPUT
Gain Adjustment Range: 18 to +42 dB in 1 dB steps
Configuration: 1/4" (6.35 mm): Balanced (Tip=audio +, Ring=audio , Sleeve = ground)
XLR: Balanced (1=ground, 2=audio +, 3=audio )
Impedance: 1/4" (6.35 mm): 1.3 k[copy] (670 [copy] Unbalanced)
XLR (line): 400 [copy] (200 [copy] Unbalanced) XLR (mic): 150 [copy]
Full Scale Output: 1/4" (6.35 mm): +15 dBV differentially (+9 dBV single)
XLR (LINE setting): +15 dBV XLR (MIC setting): 15 dBV
Mic/Line Switch: 30 dB pad
Phantom Power Protection: 1/4" (6.35 mm): Yes XLR: Yes
NETWORKING
Network Interface: Single Port Ethernet 10/100 Mbps
Network Addressing Capability: DHCP or Manual IP address
Maximum Cable Length: 100 m (328 ft)
Available Frequency Bands:
SLX-D G58 (470 to 514 MHz)
SLX-D H55 (514 to 558 MHz)
SLX-D J52 (558 to 602 MHz + 614-616 MHz MHz)
Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
For use with SLX-D Wireless Systems.
