Shure P9T Transmitter for PSM900 IEM System (G6: 470 to 506 MHz)

The P9T is a half-rack wireless transmitter used in conjunction with the P9RA+ Bodypack receiver as part of the PSM900 Wireless Personal Monitor System. It offers state-of-art technology including CueMode (patent pending), RF Sync, and RF mute switch for easy setup and operation. Connections include balanced 1/4" and XLR, loop out, and headphone out. Includes rack-mounting kit, front or back mountable antennas, and power supply.

Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.

Features:

* RF Mute Switch allows system setup without causing RF interference

* Syncs to a P9R bodypack quickly and easily over IR link using Scan and Sync

* Front panel audio input gain adjustment and LED level meter with clipping indicator

* Front or rear mountable antennas

* Compatible with PA421A and PA821A antenna combiners

* Loop out connectors for multiple mix setups and easy installation

* Switchable +4 dBu and -10 dBV input level

* Balanced, 1/4" and XLR connectors

* Bit-mapped, backlit LCD

* Includes rack-mounting hardware

* 1/8" headphone out on the front panel for easy monitoring

Specifications:

RF Output Power: Selectable 10, 50, 100 mW (regionally dependent)

RF Output Impedance: 50 Ω (typical)

Net Weight: 850 g

Dimensions: 197 mm x 166 mm x 42 mm (7.75in x 6.55in x 1.65in)

Power Requirement: 415 mA typical @ 120VAC (with RF on 100 mW power mode, no audio)

AUDIO INPUT

Connector Type: Combination XLR and 6.35 mm (1/4") TRS

Polarity: XLR: Non-inverting (pin 2 positive with respect to pin 3);

6.35 mm (1/4") TRS: Tip positive with respect to ring

Configuration: Electronically balanced

Impedance: 70.2 kΩ (actual)

Nominal Input Level: Switchable +4 dBu, 10 dBV

Maximum Input Level +4 dBu: +23.3 dBu; 10 dBV: +12.5 dBu

Pin Assignments: XLR: 1=ground, 2=hot, 3=cold;

6.35 mm (1/4") TRS: Tip=hot, Ring=cold, Sleeve=ground

Phantom Power Protection up to 60 V DC

AUDIO OUTPUT

Connector Type: 6.35 mm (1/4") TRS

Configuration: Electronically balanced

Impedance: Connected directly to inputs